Тези два паяка нещо не искат да се програмират.Използвам този програматор с avrdude.
това е грешката:
 | | |
| Цитат: avrdude.exe: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.09s avrdude.exe: Device signature = 0x1e9108 avrdude.exe: reading input file "C:\Documents and Settings\mi\Desktop\GccApplication1.hex" avrdude.exe: input file C:\Documents and Settings\mi\Desktop\GccApplication1.hex auto detected as Intel Hex avrdude.exe: writing flash (76 bytes): Writing | ################################################## | 100% 0.45s avrdude.exe: 76 bytes of flash written avrdude.exe: verifying flash memory against C:\Documents and Settings\mi\Desktop\GccApplication1.hex: avrdude.exe: load data flash data from input file C:\Documents and Settings\mi\Desktop\GccApplication1.hex: avrdude.exe: input file C:\Documents and Settings\mi\Desktop\GccApplication1.hex auto detected as Intel Hex avrdude.exe: input file C:\Documents and Settings\mi\Desktop\GccApplication1.hex contains 76 bytes avrdude.exe: reading on-chip flash data: Reading | ################################################## | 100% 0.38s avrdude.exe: verifying ... avrdude.exe: verification error, first mismatch at byte 0x0000 0x0e != 0x00 avrdude.exe: verification error; content mismatch avrdude.exe done. Thank you. | |
| | |
и при двата ми дава е тая грешка, иначе имам общо 4 2x25 и 2x45 и всички ми дават тази грешка!
Правил съм други тестове с tiny85,13 нямам проблеми само 25,45 ...
Потърсих и в Гугул ,но...
Някакви идеи?