...
void main()
{
  setup_adc_ports(ALL_ANALOG );                 // A/D Ports
  setup_adc(ADC_CLOCK_DIV_2);                 // A/D Clock   
  setup_timer_2( T2_DIV_BY_4, 10, 1); //((1/Clock)*4)* 16 * 125 * 5 = Time
  setup_timer_1( T1_INTERNAL | T1_DIV_BY_8 ); //((1/Clock)*4)* 8 * 65,536  = Time = 52.4288e-3
  enable_interrupts(INT_EXT);               //INTE=1
  ext_int_edge(L_TO_H);
  enable_interrupts(GLOBAL);

     lcd_init();
   printf(lcd_putc,"\fStart");
   delay_ms(200);

while(1)

{

   
                     printf(lcd_putc,"\fV=%2.1f A=%2.1f",Volts,current );
                     
                     lcd_gotoxy(1,2);
                     printf(lcd_putc, "Freq=%u",frquency );   
                     delay_ms(100);
}
}

lcd_gotoxy(1,1);

printf(lcd_putc,"\fV=%2.1f A=%2.1f",Volts,current );