void config_i2c1_write(){
I2C1CON=0b1000001000110000;
I2C1BRG=39;
IdleI2C1();

StartI2C1();
  /* Wait till Start sequence is completed */
while(I2C1CONbits.SEN);
  /* Clear interrupt flag */
  IFS1bits.MI2C1IF = 0;

/*send address for write*/
MasterWriteI2C1(0x9e);//9f
while(I2C1STATbits.TBF);  // 8 clock cycles
  while(!IFS1bits.MI2C1IF); // Wait for 9th clock cycle
  IFS1bits.MI2C1IF = 0;     // Clear interrupt flag


/*send pointer*/
MasterWriteI2C1(0x00);//9f
while(I2C1STATbits.TBF);  // 8 clock cycles
  while(!IFS1bits.MI2C1IF); // Wait for 9th clock cycle
  IFS1bits.MI2C1IF = 0;     // Clear interrupt flag

/*send adress for read*/
MasterWriteI2C1(0x9f);//9f
while(I2C1STATbits.TBF);  // 8 clock cycles
  while(!IFS1bits.MI2C1IF); // Wait for 9th clock cycle
  IFS1bits.MI2C1IF = 0;     // Clear interrupt flag


value = MasterReadI2C1();
while(I2C1STATbits.RBF);  // 8 clock cycles
  while(!IFS1bits.MI2C1IF); // Wait for 9th clock cycle
  IFS1bits.MI2C1IF = 0;     // Clear interrupt flag

     

AckI2C1();
  while(!IFS1bits.MI2C1IF); // Wait for 9th clock cycle
  IFS1bits.MI2C1IF = 0;     // Clear interrupt flag



value = MasterReadI2C1();
while(I2C1STATbits.RBF);  // 8 clock cycles
  while(!IFS1bits.MI2C1IF); // Wait for 9th clock cycle
  IFS1bits.MI2C1IF = 0;     // Clear interrupt flag




NotAckI2C1();
  while(!IFS1bits.MI2C1IF); // Wait for 9th clock cycle
  IFS1bits.MI2C1IF = 0;     // Clear interrupt flag



return;
}