// T6963C module connections
char T6963C_dataPort at PORTC;                   // DATA port

sbit T6963C_ctrlwr  at RB4_bit;                  // WR write signal
sbit T6963C_ctrlrd  at RB3_bit;                  // RD read signal
sbit T6963C_ctrlcd  at RB2_bit;                  // CD command/data signal
sbit T6963C_ctrlrst at RB6_bit;                  // RST reset signal
sbit T6963C_ctrlwr_Direction  at TRISB4_bit;     // WR write signal
sbit T6963C_ctrlrd_Direction  at TRISB3_bit;     // RD read signal
sbit T6963C_ctrlcd_Direction  at TRISB2_bit;     // CD command/data signal
sbit T6963C_ctrlrst_Direction at TRISB6_bit;     // RST reset signal

// Signals not used by library, they are set in main function
sbit T6963C_ctrlce at RB5_bit;                   // CE signal
sbit T6963C_ctrlfs at RA3_bit;                   // FS signal
sbit T6963C_ctrlmd at RA2_bit;                   // MD signal
sbit T6963C_ctrlce_Direction  at TRISB5_bit;     // CE signal direction
sbit T6963C_ctrlfs_Direction  at TRISA3_bit;     // FS signal direction
sbit T6963C_ctrlmd_Direction  at TRISA2_bit;     // MD signal direction

// End T6963C module connections

void main() {
  T6963C_ctrlce_Direction = 0;
  T6963C_ctrlce = 0;            // Enable T6963C
  T6963C_ctrlfs_Direction = 0;
  T6963C_ctrlfs = 0;            // Font Select 8x8
  T6963C_ctrlmd_Direction = 0;
  T6963C_ctrlmd = 0;            // Column number select
  T6963C_init(240, 128, 8);
T6963C_write_char_adv('A',22,23);
T6963C_write_char_adv('B',22,23);
T6963C_Write_Text_Adv("mcu-bg.com", 0, 0);

}

char T6963C_dataPort at PORTC;                   // DATA port

        #include        "__T6963C.h"


// T6963C module connections
char T6963C_dataPort at PORTC;
char T6963c_dataPort_Direction at TRISC;                  // DATA port

sbit T6963C_ctrlwr  at RB4_bit;                  // WR write signal
sbit T6963C_ctrlrd  at RB3_bit;                  // RD read signal
sbit T6963C_ctrlcd  at RB2_bit;                  // CD command/data signal
sbit T6963C_ctrlrst at RB6_bit;                  // RST reset signal
sbit T6963C_ctrlwr_Direction  at TRISB4_bit;     // WR write signal
sbit T6963C_ctrlrd_Direction  at TRISB3_bit;     // RD read signal
sbit T6963C_ctrlcd_Direction  at TRISB2_bit;     // CD command/data signal
sbit T6963C_ctrlrst_Direction at TRISB6_bit;     // RST reset signal

// Signals not used by library, they are set in main function
sbit T6963C_ctrlce at RB5_bit;                   // CE signal
sbit T6963C_ctrlfs at RB1_bit;                   // FS signal
sbit T6963C_ctrlmd at RB0_bit;                   // MD signal
sbit T6963C_ctrlce_Direction  at TRISB5_bit;     // CE signal direction
sbit T6963C_ctrlfs_Direction  at TRISB1_bit;     // FS signal direction
sbit T6963C_ctrlmd_Direction  at TRISB0_bit;     // MD signal direction

// End T6963C module connections
      const code char mikroE_240x64_bmp[];     // PIC can't store larger picture(240x128) in ROM
const code char einstein[];


void main() {
char txt1[] = " EINSTEIN WOULD HAVE LIKED mE";
  char txt[] =  " GLCD LIBRARY DEMO, WELCOME !";

      unsigned char  panel;         // Current panel
  unsigned int   i;             // General purpose register
  unsigned char  curs;          // Cursor visibility
  unsigned int   cposx, cposy;  // Cursor x-y position

    ANSELA = 0;
    ANSELB = 0;
    ANSELC = 0;
  C1ON_bit = 0;                 // Disable comparators
  C2ON_bit = 0;
  TRISC=0x00;
   TRISB=0x00;
   TRISA=0x00;
   T6963C_displayTxtPanel(1);

  T6963C_ctrlce_Direction = 0;
  T6963C_ctrlce = 0;            // Enable T6963C
  T6963C_ctrlfs_Direction = 0;
  T6963C_ctrlfs = 0;            // Font Select 8x8
  T6963C_ctrlmd_Direction = 0;
  T6963C_ctrlmd = 0;            // Column number select
  T6963C_init(240,128,8);
  T6963C_fill(0x33,0x00FF,0x000F);


       T6963C_graphics(1);
  T6963C_text(1);
panel = 0;
  i = 0;
  curs = 0;
  cposx = cposy = 0;
  T6963C_write_text(txt, 0, 0, T6963C_ROM_MODE_XOR);
  T6963C_write_text(txt1, 0, 15, T6963C_ROM_MODE_XOR);

  /*
   * Cursor
   */
  T6963C_cursor_height(8);       // 8 pixel height
  T6963C_set_cursor(0, 0);       // Move cursor to top left
  T6963C_cursor(1);              // Cursor off



T6963C_write_char_adv('A',22,23);
T6963C_write_char_adv('B',22,23);
T6963C_Write_Text_Adv("TOTO", 0, 0);


}

#include        "__T6963C.h"
   // ------------------------------------------------------
// GLCD Picture name: panel_128x128.bmp
// GLCD Model: T6963C 128x128
// ------------------------------------------------------


// T6963C module connections
char T6963C_dataPort at PORTD;//DATA port
sbit T6963C_ctrlwr  at RC2_bit;//WR write signal.
sbit T6963C_ctrlrd  at RC1_bit;//RD read signal.
sbit T6963C_ctrlcd  at RC0_bit;//CD command/data signal.
sbit T6963C_ctrlrst at RC4_bit;//RST reset signal.
sbit T6963C_ctrlwr_Direction  at TRISC2_bit;//WR write signal.
sbit T6963C_ctrlrd_Direction  at TRISC1_bit;//RD read signal.
sbit T6963C_ctrlcd_Direction  at TRISC0_bit;//CD command/data signal.
sbit T6963C_ctrlrst_Direction at TRISC4_bit;//RST reset signal.

//Signals not used by library, they are set in main function.
sbit T6963C_ctrlce at RC3_bit;//CE signal.
sbit T6963C_ctrlfs at RC6_bit;//FS signal.
sbit T6963C_ctrlce_Direction  at TRISC3_bit;//CE signal direction.
sbit T6963C_ctrlfs_Direction  at TRISC6_bit;//FS signal direction.
//End T6963C module connections.


//
void main() {
  C1ON_bit = 0;                 // Disable comparators
  C2ON_bit = 0;
  TRISD=0;
  TRISA=0;
  TRISC=0;
  TRISB=0;

T6963C_ctrlce_Direction = 0;
  T6963C_ctrlce = 0;//Enable T6963C .
  T6963C_ctrlfs_Direction = 0;
  T6963C_ctrlfs = 1;//Font Select 8X8

  T6963C_init(240,128,8);
  Delay_ms(500);

  T6963C_graphics(1);
  T6963C_text(1);
  T6963C_cursor_height(0);
  T6963C_set_cursor(0,0);
  T6963C_cursor(0);
  T6963C_cursor_blink(0);
  T6963C_displayGrPanel(0);
  T6963C_displayTxtPanel(0);

  Delay_ms(100);

  T6963C_panelFill(0);

   T6963C_line(0, 0, 239, 127, T6963C_WHITE);
   T6963C_rectangle(20, 20, 219, 107, T6963C_WHITE);
  T6963C_write_text("MCU-BG.COM",40,2,T6963C_ROM_MODE_OR);
  T6963C_write_text("MCU-BG.COM",50,3,T6963C_ROM_MODE_OR);
    Delay_ms(500);

}